中国国家标准分类目录 - Y 轻工、文化与生活用品
1 GB 10631-1989 烟花爆竹安全与质量 Fireworks and firecracker—Requirements of safety and quality
2 GB/T 10632-1989 烟花爆竹计数抽样检查规则 Fireworks and firecrackers—Rules of sampling for inspection by attributes
3 GB/T 11886-1989 首饰含银量化学分析方法 Chemical analysis—Method of silver content in jewellery
4 GB/T 11887-1989 贵金属首饰纯度命名方法 Jewellery—Fineness of precious metal alloys and designation
5 GB/T 11888-1989 首饰指环尺寸的定义、测量和命名 Jewellery--Ring--Size-Definition, measurement and designation
6 GB 13511-1992 配装眼镜 Assembled spectacles
7 GB/T 13524.1-1992 陈设艺术瓷器 雕塑瓷 Standard of artistic porcelain—Carved porcelain
8 GB/T 13524.2-1992 陈设艺术瓷器 器皿瓷 Standard of artistic porcelain—Artistic ware
9 GB/T 13593-1992 民用蜂窝煤 Civil honeycomb briquet
10 GB/T 14459-1993 贵金属首饰计数抽样检查规则 Sampling inspection rules by attributes for precious metal jewellery
11 GB/T 9288-1998 首饰含金量分析方法 Analyse-method of gold content in jewellery
90/99 轻工机械
1 GB 12073-1989 乳品设备安全卫生 Security and sanitary standard for dairy equipment
2 GB/T 12554-1990 塑料注射模技术条件 Specification of injection mould for plastics
3 GB/T 12555.1-1990 塑料注射模大型模架 标准模架 Injection mould for plastic large-size mould bases—Standard mould bases
4 GB/T 12555.2-1990 塑料注射模大型模架 技术条件 Injection mould for plastic large-size mould bases—Specification
5 GB/T 12555.3-1990 塑料注射模大型模架 座板 Injection mould for plastic large-size mould bases—Elamping plates
6 GB/T 12555.4-1990 塑料注射模大型模架 模板 Injection mould for plastic large-size mould bases—Mould plates
7 GB/T 12555.5-1990 塑料注射模大型模架 支承板 Injection mould for plastic large-size mould bases—Support plates
8 GB/T 12555.6-1990 塑料注射模大型模架 推板 Injection mould for plastic large-size mould bases—Ejector plates
9 GB/T 12555.7-1990 塑料注射模大型模架 垫块 Injection mould for plastic large-size mould bases—Spacer plates
10 GB/T 12555.8-1990 塑料注射模大型模架 带头导柱 Injection mould for plastic large-size mould bases—Guide pillars with head
11 GB/T 12555.9-1990 塑料注射模大型模架 有肩导柱 Injection mould for plastic large-size mould bases—Guide pillars with shoulder
12 GB/T 12555.10-1990 塑料注射模大型模架 推板导柱 Injection mould for plastic large-size mould bases—Guide pins for ejector plater
13 GB/T 12555.11-1990 塑料注射模大型模架 直导套 Injection mould for plastic large-size mould bases—Straight guide bushes
14 GB/T 12555.12-1990 塑料注射模大型模架 推板导套 Injection mould for plastic large-size mould bases—Guide bushes with head
15 GB/T 12555.13-1990 塑料注射模大型模架 复位杆 Injection mould for plastic large-size mould bases—Return pins
16 GB/T 12555.14-1990 塑料注射模大型模架 衬套 Injection mould for plastic large-size mould bases—Iiner bushes
17 GB/T 12555.15-1990 塑料注射模大型模架 限位块 Injection mould for plastic large-size mould bases—Stop plates
18 GB/T 12556.1-1990 塑料注射模中小型模架 Injection mould for plastic--Medium size and small size mould bases
19 GB/T 12556.2-1990 塑料注射模中小型模架技术条件 Injection mould for plastic—Specifications for medium size and small size mould bases
20 GB/T 14253-1993 轻工机械通用技术条件 General specifications for light industry machinery
21 GB/T 15069-1994 罐头食品机械术语 Terminology of food canning machinery
22 GB 16798-1997 食品机械安全卫生 Requirements of safety and sanitation for food machinery
下一篇：中国国家标准分类目录 - M 通信、广播
-